site size

This Site is Best viewed at 1024 x768

My T.O.U.

my tutorials
the tutorials on this blog are my own design any similarity to another tutorial is strictly coincidental
please do not copy these tutorials
please use a link if you wish to use these tutorials for your forum or group
any and all supplies in these tutorials have links please dont forget to leave some love when using the supplies
do not copy or save my images they are mine
do not claim them as your own work

MY SCRAP KITS
all of the scrap kits on this blog are mine
they are all my own design
please do not share them with others but you may post a link of where to get them
please do not change the file formats
or claim them as your own
the scrap kits are all my own work

you may colour the kits
you may use more than one kit in a tag/ tut you are using them for but only my kits do not mix with other kits

if you have any problems or questions please leave a message in the chat box and i will get back to you

Misty x




My Other Tutorials

if you wish to see the full size of the tags 
please click the tag you wish to view

Autumn Romance



this tutorial is written by me

any similarity to another tutorial

is strictly coincidental



i used the art work of  © Anna Marine  

you can view her work  Here

 is a member of CDO 

you can purchase tubes Here

the kit used in this tutorial is a P.T.U. kit
from Heartbeat Creations 
it was sold as  part of a special offer 
of 58 kits 
you can purchase the kits  Here
this is a one time offer and very much worth the purchase

Supplies :
mask of choice 
tube of choice 
kit of choice

Plug ins :
xero mistifier 
xero radience 
xero porcelain 
Mura's meister copies
Penta.com colour dot


lets start :)

open  new raster layer 800 x 800 
find your kit and  choose a dark paper 
copy /paste as new layer into work area
layers/load save mask
choose your mask and click ok 
in layer pallete right click and choose merge/merge group
again in layer palette group layer duplicate 
layers/merge/merge down 
in your kit find a circle frame 
copy paste as new layer into work area
or using your eclipse tool make a frame 
using the settings below choosing a colour from yourtube

back to kit find a flower or  other item  and copy paste as new layer 
resize  your flower by 40% bicubic all layers unchecked 
effects plug in  Mura's miester  copies
using the setting below

making sure your flower/item layer is active /layers/merge/merge down 
onto your frame layer 
open your tube and copy paste as new layer into  your work area 
drag the tube layer below your frame layer 
on your tube layer selections/select all /float/defloat
highlight and make active your frame layer 
using your eraser tool erase the part of the frame and flower /item  
where it covers the top of your tube
selections /select none
duplicate your tube layer by right clicking and choosing duplicate 
on your copy layer 
effects plug in /xero/mistifier with ettings below

again xero plug in radience with setting below 

on original tube layer plug in xero porcelien  with setting below 

on orginal tube add a drop shadow as shown below

on copy of tube layer find blend mode right click  and choose soft light 
lower opacity to 24%
add other elements to build up your image 
once  you feel you like your  finished image  add a drop shadow to some items
to make them stand out  or if you wish you could add  drop shadow to all
changing the  blur on your drop shadow 
layers /merge /merge visible 
duplicate your merged layer
on your orginal layer  resize by 90% /adjust blur gaussian blur 9
effects plug in  penta.com with setting below

on copy layer resize by 85 %  adjust sharpen /sharpen more default setting   
choose a nice font 
i used  hawaii lover  and  choosing to contrasting colours from your tube 
add your name 

remember to add your copyright& licence number and url if using a ptu  tube 
or just the url and copyright of the artist if  free to use 

that's it your done :) 
hope you enjoyed this tutorial








Regret





this tutorial is written by me

any similarity to another tutorial

is strictly coincidental



i used the art work of  © Anna Marine  

you can view her work  Here

 is a member of CDO 

you can purchase tubes Here

supplies :
2 mask of choice 
my supplies Here
3 fonts 
Haweii Killer  
Angelic war
renaissance
download HERE


plugins:
xenofex 2 constellation
penta .com  colourdot



lets get started :o)
open a new raster layer 800x800
open your  supplies and  copy paste your frame to your work layer 
layers new raster layer 
drag below the frame layer 
choosing a dark colour from your tube  or frame 
flood fill new layer 
layers/load save mask 
choose a mask that will show a nice pattern or  picture 
right click mask layer in your  layer palette  merge /merge group
using your deform tool 
stretch the mask till only the picture shows 
highlight your frame layer 
using your  selection tool choose rectangle 
draw around the center of the frame as shown below

selections invert 
highlight mask layer  
and hit delete on your keyboard
this should cut away all of the mask layer around the frame 
copy paste your tube as new layer 
drag below frame layer if it is above it
highlight tube layer 
selections /select all/ float /defloat
highlight frame layer and using  eraser tool carefully rease  the parts hidden by the frame 
only erase any of the frame hiding  the top to middle of the tube 
add a drop shadow to your tube as shown below
find a nice script font and  write some words 
you can copy mine if you wish 
place your word art at the top right of your frame 
add your name  and copyright /url of your  artist tube 
layers merge /merge visible
duplicate your merged layer 
on copy layer resize by 85%
on original layer  resize by 90%
still on original layer  adjust blur /gaussian blur with setting below

effects  plug in penta .com with setting below

layers / new raster layer 
drag this layer down below your merged layer 
flood fill with a dark colour
find your second mask and load
right click mask layer and  merge group
again effects  plug in penta .com  olour dot same setting 


ANIMATION

if you wish to animate your  tag as i have  these are the instructions 

duplicate your  layer twice more to make three layers 
highlight top layer 
using magic wand tool choose where you wish your  glitter to show 
i used the rose petals in the frame 
so for instrution i will use  them 
click on each petal  you wish to use 
ive found that less is more 
i chose three petals on each rose 
once you have  made marching ants on each petal you want to use 
effects /plug in /xenofex  in the setting  tab choose bling bling with the setting below


DO NOT DESELECT 
on middle layer  plug in xenofex  on the bottom left  hit the random  button once 
repeat with bottom layer 

again highlight your top layer in layer palette 
open animation shop
paint shop 
on top layer 
right click work area  and copy
ani shop paste as new animation 
paint shop highlight middle layer  and right click copy
ani shop right click  animation frame  paste before current frame  
paint shop right click bottom layer copy
animation shop  right click work layer and  paste before current frame 

on top tool bar you will see a small film strip click this to see you animation working 
if you like it save as gif 

thats it your done :o)

hope you enjoyed this tutorial 





Burlesque

this tutorial is written by me

any similarity to another tutorial

is strictly coincidental


i used the art work of  Lorenzo Di Mauro 

you can view his work  Here

 is a member of PTE

you can purchase tubes Here

supplies :
tube of choice
mask of choice 
font of choice
Burlesque collab kit found on my home page 
don't forget to click Avenue Did Me  blinkie for the other part of this collab kit 
plugins:
penta.com colour dot
eyecandy 400 gradient glow



lets get started :o)

open a new raster layer 800x800 
flood fill this layer white
layrs new raster layer and flood fill black
layers /load save mask  and find a mask you like
once you have chosen your mask click ok
open  your kit and find frame two /copy pste as new layer 
choose three papers from one of the kits or you can mix and  match from both kits 
choose your elements and  minimise them in  psp
highlight your bottom layer (white layer ) im layer palette
maximise your first paper  image resize by 80%
copy and paste the paper  as new layer 
using your deform tool twist the paper  so that it fits into  one of the rectangles in your frame 
repeat this preocess with your other two papers untill your rectangles are filled

if you find the papers are still to large just move the edges till they fit with the deform tool
get your first element and copy paste into your middle top frame this will be your center for the tag 
open any of the other lelements  from the kits you want to use and place them around the frame and tube 
choose a word art and place it  one layer at top left of tube and one layer at bottom right 
x out your white layer and  your mask layer 

highlight another layer not x out 
layers /merge/merge visible
duplicate this layer and on original layer resize by 90%
adjust /blur gaussian blur 20
you can now use a plug in or texture on your blurred layer i used colour dot from penta.com
on your copy layer resize by 85 % 
add your copyright of tube and  you url 
add your name 
you can add a gradient glow to your name to match the 
word art if you wish 
and thats it your done 

hope you enjoyed this tutorial
many thanks to Avenue for  making this collab kit with me 







Wicked In Black









this tutorial is written by me


any similarity to another tutorial


is strictly coincidental






i used the art work of  © Keith Garvey
the kit used 
in this tag is a Ptu kit 
from Angel Designz
you can purchase the Kit  Here






supplies :
Tube of choice 
font of choice 
kit of choice




plugins:
Penta.com /Jeans 
eye candy 4000 /gradient glow






lets get started :o)


open a new raster layer 800x800
flood fill white 
open your kit and tube 
from the kit pick 6 or 7 elements and if  included one word art
for the center of my template i used one of the elements  provided with the kit
layers new raster layer 
rectangle tool and draw a rectangle if you have nothing in your kit to use
choosing a paper from your  kit copy and paste as new layer
click inside your rectangle , selections /invert 
highlight your paper layer and hit delete on your keyboard 


using your rectangle shape draw a wide thin rectangle
duplicate this twice 
highlight your middle rectangle selections /select all/float/defloat
choosing a different paper choosing a different paper
copy paste as new layer 
selections /invert hit delete 
highlight your top rectangle 
effects /distortion effects / wind using the setting below


repeat this on your  bottom rectangle layer 
highlight your white raster layer 
choosing the elements  from the kit place around the edges of the  rectangles
see mine for instructions 
copy paste your tube as new layer and place to the  right of the  box you drew
choosing two elelments drag them above your  box one either side
again highlight your white layer 
layers /new raster layer 
flood fill with a dark colour from your tube 
layers/load save mask
choose your first mask and load it 
right click mask layer in your layers pallete and choose merge group
duplicate your mask layer /image mirror/image flip
x out your mask layers and your white layer 
click to activate and un x layer and  merge /merge visible
on your original layer  resize by 90%
on your copy layer  resize by 85%
highlight your original merged layer 
adjust blur /gaussian blur 20
plug in penta.com jeans with setting below


add your word art 
plug in eye candy 4000
gradient glow with the setting below


gradient setting 

colour setting 






repeat this setting again 
repeat this time changing glow width to 7 
now add a drop shadow as shown below


repeat this with your  name 
add your copyright and url and licence if you  need one 


un x the mask layers 
delete the white layer if you wish 
save as png 
that's it your done 
hope you enjoyed this tutorial :o)


foot note :
I want to thank Kelly of Angel Designs 
for allowing me to use this beautiful scrap kit in this tutorial
hugs Kelly  your a good friend x





Twilight





this tutorial is written by me

any similarity to another tutorial

is strictly coincidental



i used the art work of © Zindy S.D.Neilson 

you can view her work  Here

supplies :
Mask of choice 
font of choise
tube of choice

plugins:
dsb flux bright noise
penta .com colour dot



lets get started :o)
open a new raster layer 800x800
flood fill white 
using your pre set shape find your rounded 
rectangle tool and draw a large rectangle
forground white / background black
using your magic wand  click inside the rectangle
layers/new raster layer 
on your white forground
using a nice texture  click inside the selection 
selections /select none
layers merge /merge down
open your tube and  copy paste as new layer 
if you are using zindy's tube you may 
need to use the pic tool 
to make it a little narrower
again layer /merge/merge down
duplicate this layer by 60% and duplicate twice
on one image  mirror  and place top left 
other place bottom right 
using pre set shape coose star 
revert colours using the small arrow 
at the side of the colour boxes 
repeat the same steps as you did with the rounded rectangle
using a different texture 
duplicate the star twice and resize 
place them where you like them 
merge /merge down  on the three star layers untill single layer
effects dsb flux bright noise 
click ok
now duplicate and mirror  place them  on opposite side of other stars 
see mine for placing 
at this point you can x out the white layer
layers merge /merge visible all layers
duplicate your  merged layer and resize by 95 %
on copy layer  resize by 90%
on original layer adjust gaussian blur  by 30%
using penta.com  colour dot with settings below

highlight your white x out layer and layers /new raster layer 
flood fill thisl layer black
choose your mask and load it 
merge /merge visible all layers 
add your copyright and url
and any word art you choose
add your name
 save as a png
and thats it your done 
hope you enjoyed this tutorial :o)










Friendship Rose

this tutorial was written by me 
any similarity
to another tutorial 
is strictly coincidental

supplies :
 tube of choice 
font of choice 
scrap kit of choice 

plug ins :
penta .com dotandcross
xenofex2 burnt edges
Mura's miester cloud and copies

open a new raster layer 800x800
forground colour of choice / background colour null
using your rectangle tool
draw a large rectangle 
selections / select all /float /defloat
effects mura's miester clouds 
with setting below

effects /3d effects inner bevel 
with setting below

effects /plug in xenofex 2/burnt edges 
with setting below

resize your frame  by 60%
open your scrap kit of choice 
choose a nice paper and copy
paste as new layer into work area
selection tool and draw a rectangle 
so that its overlapping your frame from inside 
as shown below

selections invert 
highlight paper layer and hit delete
add your tuube 
highlight tube layer
selections /select all float/defloat
highlight frame layer
use eraser tool and erase any of the frame 
that is covering your tube at the top
find some nice flowers and make a small arrangement  
at the rigght side of your frame
add a bow 
if you have a sloppy bow then put this onto your frame 
using your pick tool
fit it to the frame
if your tube is being covered  by the sloppy bow
(like the hand on my tube )
carefully erase the bow where it covers 
it may be a good idea to use your scroll wheel
and scroll in very close to see where to erase
also a good idea is to lower 
the opacity of the item you wish to erase 
add a nice contrasting flower  and resize by 30% 
effects plug in Mura's miester copies 
with settings below

drag this below your fame 
and paper layers
add any word art you wish to use 
add copyright and url of your tube 
merge /merge visible
duplicate this layer

on original layer  resize by 90%
on copy layer resize by 85%
on copy layer /adjust/blur / gaussian blur by 30
effects plug in penta .com
dot and cross with setting below

repeat this plug in three times more 
add your name 
effects 3d effects inner bevel same setting as before
effects3d effects drop shadow as below

layers merge merge visible
and save 
thats it your done 
hope you enjoyed this tutorial :o)





Revalution

this tutorial was written by me 
any similarity
to another tutorial 
is strictly coincidental

i used the art work of  © Keith Garvey
you can purchase his work Here

supplies :
my suplies Here
tube of choice
font of choice 
mask of choice

Plugins :
xero 

lets get started 

download my supplies

open and minimise each item
in your psp
open a new raster layer 700x700
with white background
find your frame copy/paste as new layer
onto white work area
open the paper supplied copy/paste
as new layer 
resize by 70%
drag the paper layer below your frame 
in your layer palette
highlight your frame layer
using magic wand  click inside your frame 
selections/modify /expand
expand by 9
selections / invert
highlight your paper layer
hit delete on your keyboard
this should remove all the excess paper
selections /select none
find the word art and copy paste as new layer 
using mover tool make sure it is 
in the center of the heart
copy /paste as new layer your tube 
resize to what is needed to show most 
of the head and shoulders
inside the frame
again using magic wand click 
inside your  frame layer and choose 
selections /invert
highlight your tube layer 
hit delete on your keyboard
change from normal to luminence 
on the newly pasted tube 

on the  tube layer 
effects /xero / mistifier 
with the settings below


i have given embeleshments you can 
choose same as me or change them
open ships wheel and  resize by 60%
copy/paste as new layer
drag to top left of frame 
choose anchor again resize 60%
copy paste as new layer
place at bottom left of frame 
see preview for placement

open shooting star resize by 60%

copy /paste as new layer
place center top of frame
open tag resize by 90%
image rotate/free rotate by 20% right
place under the ships wheel on frame
open paper clip 
resize by 90%
copy paste as new layer 
image rotate  same as tag
zoom into your paper clip and  remove the 
outside of the clip curve  as shown in my preview

copy paste as new layer your tube
drag to the right of your frame
duplicate tube layer
on copy of tube layer 
effects xero /radience with setting below

effects xero mistifier  with setting below

change opacity to 60
on original layer 
effects / xero / porcelien with settings below

add a drop shadow to your original tube 
and all embeleshments as below


x out your white layer
layers/new raster layer
find a contrasting colour from your tube
flood fill new layer with this colour 
choose your mask and merge /merge group
with white layer still x out  layers/merge /merge visible
find your font and write your name
add a drop shadow as above 
add your copyright and url
layer/merge/merge visible
you can now save either as a jpeg or png 
if you choose png  you will need to delete the  
white background layer in your layer palette

thats it your done 
hope you enjoyed this tutorial :o)






Don't Be Dumb Be Aware


this tutorial was written by me 
any similarities to another tutorial
 are strictly coincidental

supplies 
my template  Here

tube of choice 
font of choice

this tutorial is great if you belong to a forum
or group and want to offer a tag or make prezzies
all you have to do is add your tube 
and maybe change colours of the template

lets begin 

open the template
open your tube 
check the  layers and find the word art inside the circle

copy paste tube as new layer 
resize if needed and have just the head 
and shoulders showing 
on the pink circle  selections /select all/float/defloat/invert 
highlight the  tube layer and hit delete on your keyboard 
in layer palette change from normal to overlay

again back to your tube and copy paste as new layer 

this time leaving the full tube 
place to the left side of your circle 
if you find your tube is not top layer right  
click the layer and  choose arrange 
send to top
add a drop shadow 
layers /merge/merge visible 
add your name and copyright  url
and thats it your done 
merge visible resize if needed

i have animated my  tag so you will need the instuctions below 
if you wish to animate 


ANIMATION

duplicate the merged image twice more

using your magic wand tool
click on strand of hair  on your main tube image 
effects /plug ins 
xenofex 2 constilation
in the drop down menu choose bling bling 
at the bottom of the  xenofex screen you will see a button named random seed
click this once
highlight middle layer 
effects  bling bling (look at bottom under plugins )
again hit random seed once 
repeat with last layer 

copy paste each layer into animation shop starting with top layer 
paste into ani shop  by right click paste as new animation

middle layer in psp copy
ani shop on first frame right click paste before cureent frame 
repeat with bottom (last) layer

save as gif and your done 

hope you enjoyed this simple tutorial :o)
same tag no animation :o)